Start from the job, not the machine
Find what you need to do with your material, and the machine we build for it. Every machine is sized to your material and throughput before we quote.
PET and polymer processing
Crystallising, drying, mixing and conveying, from the silo to the screw.
PET crystallising
Amorphous PET softens and clumps if it is heated to drying temperature. It has to be crystallised first.
- Crystallises and dries in one continuous pass
- Infrared heating in a rotary drum
PET drying
Water in PET breaks the polymer chains in the melt: viscosity falls and colour changes.
- 15–25 min instead of 5–6 h
- 0.22 kWh per kg on PET bottle flake
- No desiccant to buy or replace
Mixing at the machine
Components dosed separately have to be brought to a uniform mix before they reach the screw.
- 10–15 minutes to a homogeneous batch
- 200 to 2000 litres
- Accepts material while it is mixing
Conveying granules to the hopper
Vacuum loading of granules into the machine hopper.
- 6 L receiver
- Standard, branded components
Conveying powders
Powder follows the air to the filter and packs into the pleats, and suction falls away.
- Filter cleaned by reverse pulse between loads
- Suction does not decay through the shift
Conveying without a motor
A venturi loader driven by compressed air, for duties where nothing else is as simple.
- No motor at all
- Our first loader, still built
Nuts, seeds, spices and grain
Continuous infrared roasting and drying, and infrared and UV-C sterilisation. No chemicals, no fumigants and no water.
Roasting
Shortwave infrared heats the product directly in a continuous rotary drum.
- Continuous first‑in first‑out flow
- Recipe stored per product
Drying
Sized to your starting moisture, target moisture and throughput.
- No chemicals, no fumigants, no water
- Drum geometry specified for the material
Infrared and UV-C sterilisation
Reduces the microbial load on the product. The drum lifts and turns every piece, so each face comes round to the UV-C field again and again.
- IR and UV-C stages in one drum, synchronised
- A failed lamp stops the feed
Stainless conveying
SS-304 throughout, with the level sensed from outside the sight tube.
- 12 L effective
- Nothing stands in the product path
Bulk-handling conveyors
Moulded components for idler rollers.
Not sure which fits?
Tell us the material, how much of it per hour, and what it has to feed. The person who reads your enquiry is the person who designs the machine.
A.B. Plastech · Modern Industrial Estate, Bahadurgarh, Haryana
info@abplastech.co.in